-3-
2.2 Outline of Operation
1. Connect the power cord to the LPX100 projector.
The POWER LED lights up in order of red, green, and red. (Standby mode)
2. Press the <ON/STANDBY> key.
The lamp is turned on and the POWER LED lights up green.
The Lamp LED lights up green.
When the PC input or the VIDEO input is selected and the input signal from the PC or
the video is not received, the whole screen turns blue and the message “XX signal is
not input.” is displayed.
3. Select the input.
Select PC or VIDEO to display the image.
4. Make adjustments.
For user adjustments, press the <MENU/ENTER> key to display the Menu, and then
select the desired adjustment item by the or key and press the
<MENU/ENTER> key to confirm the entry. To select an item, use the or key.
To make adjustments, use the or key.
For service personnel adjustments, use (1) the <ON/STANDBY> + <ENTER> key
combination, (2) the <KEYSTONE > + <AUTO SYNC> key combination, and (3)
the <SOURCE> + <KEYSTONE > key combination continuously to enter the Test
mode. The procedural steps are the same as for user adjustments.
5. Turn off the lamp.
On the completion of the adjustment, press the <ON/STANDBY> key to turn off the
lamp.
