Configuration via Management Software
Draco MultiView 4K
60
132
7.7.3 Opening a Locally Saved Configuration
1. To open a locally saved configuration, proceed as follows:
2. Click
Open…
in the toolbar.
3. Go to the location of the configuration file to be opened.
4. Click the configuration file to be opened.
5. Click
Open
, to open the configuration file.
Fig. 96
Management software dialog
Open
The configuration can also be opened via drag & drop. To do this, click on the configuration file, hold down
the left mouse button and drag the configuration file into the management software.
7.7.4 Uploading a Predefined Configuration to the Draco MV
Using the function
Upload
, the created configuration can be saved within eight storage locations in the
Draco MV (
File#1
to
File#8
). However, it does not replace the buffering of configuration (see chapter 6.6.1,
page 97).
Additionally, a configuration can also be saved as default configuration that can be automatically loaded
with each start (see chapter 7.4.1, page 106).
To upload an opened configuration to the Draco MV, proceed as follows:
1. Click
Upload
in the toolbar.
A login window appears.
2. Enter the IP address of the Draco MV.
3. Enter the username and password of the administrator.
4. Click
Next
to display the selection of storage slots.
