Draco MultiView 4K
60
Configuration via OSD
73
6.2.2 Setting Network Configuration
NOTICE
To initialize system-relevant configuration changes on the Draco MV, the Draco MV must be restarted.
The restart of the Draco MV may take several minutes, and the Draco MV is not available during the
restart.
NOTICE
If the syslog function is activated, the logging will be started after restarting the Draco MV.
The parameters for the network configuration are set in this menu.
Fig. 52
OSD Menu
Configuration - Network
The following parameters can be configured:
Network Interface
Field
Entry
Description
DHCP
Y
The network settings are automatically supplied by a DHCP
server.
Note:
If DHCP is activated and there is no physical network
connection available, the boot times might increase.
N
Function not active (default).
IP Address
Byte
Enter the IP address if DHCP is not active (default:
192.168.100.95).
