Draco MultiView 4K
60
Configuration via OSD
87
6.5.2 Activating and Deactivating the Edit Mode
To activate the edit mode in Free Mode, proceed as follows:
Press Hot Key, F8.
The OSD mouse (here in orange) is activated and located in the upper left corner, and the transparency
of the display changes. On the upper left of the display, a hint for the help text display is shown. Source
frames or source names are not displayed in the edit mode.
Fig. 60
Free Mode - Example after activating the edit mode
To exit the edit mode in Free Mode, proceed as follows:
Press Ctrl + Esc.
Changes of layouts remain without saving. In the event of a sudden power failure, layout changes are lost,
and the layouts are reset to the latest saved state.
When exiting the edit mode, the focus will be on the window that had received the last left mouse click.
6.5.3 Opening the Help Text in the Edit Mode
Press h to show the help text for the edit mode with all options in the edit mode.
Fig. 61
Free Mode - Help text in the edit mode with adjustment options
