Draco MultiView 4K
60
Configuration via Management Software
101
7.2 Configuring in Offline Mode
Configuration and system settings via management software can be changed in offline mode without a
direct connection between Draco MV and the management software. Afterwards, the configuration must be
uploaded to the Draco MV. Hereby, the following steps are necessary:
1. Click
Connect
to connect the management software with the Draco MV.
The manufacturer-specific configuration (Factory Settings) saved on the Draco MV is loaded into the
management software.
2. Click
Download
in the toolbar to download the configuration.
A new tab will be opened with the downloaded configuration.
3. Click
Disconnect
to close the connection from the management software to the Draco MV.
4. Make any edits at the downloaded configuration and system settings.
5. Click
Apply
to confirm the changes.
The changes apply immediately in the downloaded configuration.
6. Click
Upload
in the toolbar to upload the configuration to the Draco MV and activate it immediately
(optional) or later.
7. Click
Save Status
to save the Draco MV status (backup file).
