Configuration via OSD
Draco MultiView 4K
60
98
6.6.2 Saving a Predefined Configuration
In this menu, the current configuration can be saved in up to eight storage locations in the permanent
memory of the Draco MV memory (
File #1
to
File #8
).
In addition to the eight memory locations, there is also a standard storage location (
Default
). A
configuration stored here can be loaded automatically every time the Draco MV is started instead of the last
active configuration (see chapter 6.2.1, page 70).
The current configuration is saved to the selected memory location and is immediately displayed in this
menu. The configuration previously saved at this memory location is overwritten.
However, saving predefined configurations does not replace saving the active configuration (see
chapter 6.6.1, page 97).
Fig. 76
OSD Menu
Configuration - Save as…
Saving position
Name and detailed information
Active
Name and detailed information of the current configuration are shown. This
configuration can be saved.
Default
Name and detailed information of the respective saved configuration are shown.
This storage location can be overwritten.
File #1
to
File #8
Name and detailed information of the respective saved configuration are shown.
These storage locations can be overwritten.
