Description
Draco MultiView 4K
60
18
3.2.5 Switching Methods
In this user manual, we use two terms to describe switching methods with different results.
When using the Draco MV as video multi viewer without using keyboard and mouse, focusing on another
input is the relevant switching method (see chapters 12, 13 and 14, pages 165, 166 and 173).
When using USB-HID control, depending on the selected display mode, it is possible to stream the video
signal of an input to a focused window (in the foreground or on the main window) and have the current
USB-HID control on another window (controlled window) at the same time.
System part/interface Focusing on another input
Switching the USB-HID control
Internal window
arrangement
Depending on the current display mode,
the internal window arrangement
changes based on the selected input(s).
The internal window arrangement
remains with focused window.
Video outputs
All video outputs get the information of
the changed window arrangement.
No reaction.
Main monitor
Depending on the current display
mode, the associated window of the
selected input is displayed on the main
monitor.
No reaction.
Monitor 2
Depending on the current display mode,
monitor 2 shows a mirrored image of
the main monitor or displays the
associated window of another input.
No reaction.
USB-HID
The USB-HID control is switched to the selected input.
Mouse
The mouse can be used in the window associated to the selected input with
current USB-HID control.
Source Frame
With activated Active Source Frame option, a frame is shown around the
window associated to the selected input with current USB-HID control.
USB 2.0
Unblocked USB 2.0 ports are routed to the selected input.
Audio outputs
Both audio outputs output the audio signal of the focused input/input with current
USB-HID control (except if using the Mixed Audio option, see chapter 3.2.6,
page 19).
