Configuration via OSD
Draco MultiView 4K
60
70
6.2 System Settings
6.2.1 Setting System Configuration
The parameters for the system configuration are set in this menu:
Fig. 51
OSD Menu
Configuration - System
The following parameters can be configured:
System
Field
Entry
Description
Device
Text
Enter the device name of the Draco MV (default: DPSWITCH-01).
Name
Text
Enter the name of the configuration that is used to save the
current settings (default: Standard).
Info
Text
Enter additional text to describe the configuration if required
(default: Factory settings).
Load Default
Y
Start the Draco MV after a restart or a switch-on with the
configuration stored as Default.
N
Start the Draco MV after a restart or a switch-on with the last
saved configuration (default).
Enable LAN Echo
Y
Send all switching commands performed in the Draco MV as an
echo via LAN connection.
Note:
This function should be enabled when using a media
controller via LAN connection.
N
Function not active (default).
