iglu Inuit 6I, Руководство по установке

Страница: 70 / 73

70
COMPLETING THE INSTALLATION
Check the following after completing the installation.
INSTALLATION OUTDOOR
UNIT
• Check the external surface and the inside of the outdoor unit.
• Is there any possibility of a short circuit?
• Is the place well-ventilated and ensures space for service?
• Is the outdoor unit fixed securely?
INDOOR UNIT
• Check the external surface and the inside of the indoor unit.
• Is the place well-ventilated and ensures space for service?
• Check if the center of the indoor unit is ensured and if it is installed horizontally.
ADDING REFRIGERANT
• Are the length and the difference between the refrigerant pipes within the
allowable
range?
• Is the pipe properly insulated?
• Is the quantity of the additional refrigerant correctly weighed in?
INSTALLING THE DRAINPIPE
• Check the drainpipe of the outdoor unit and the indoor unit.
• Have you completed the drain test?
• Is the drainpipe properly insulated?
INSTALING THE WIRE
• Have you performed earthing work 3 on the outdoor unit?
• Is a 2-core cable used?
• Is the length of the wire in the limited range?
• Is the wiring route correct?
FINAL CHECKS AND TRIAL OPERATION
INSPECTION BEFORE TEST OPERATION
1. Check the power cable and communication cable of the indoor and outdoor units.
2. Check the power supply between the outdoor unit and the cabinet panel.
- Check the 220-240 V~ / 380-415 V~ with the voltage meter.
3. Once the outdoor unit is turned on, it performs the tracking to check the connected indoor unit and options
.
TEST OPERATION
1. Run the unit by KEY MODE or controller.
- Inspect the compressor sound during the initial operation. If a roaring sound is heard, stop the operation.
2. Check the indoor and outdoor units’ running status.
-
Indoor and outdoor unit’s abnormal running noise.
- Proper drainage from the indoor unit in cooling mode.
- Check the detailed running status using the S-NET program.
3. Finish the test.
4. Explain to the customer how to use the Air to Water Heat Pump following the user’s manual.