iglu Inuit 6I, Руководство по установке

Страница: 54 / 73

54
SELECTING THE REFRIGERANT PIPE
Outdoor unit capacity (kW)
Liquid side
(mm)
Gas side
(mm)
I
GLU® Inuit 6I/
I
GLU® Inuit 6WTI
ø6.35 ø15.88
I
GLU® Inuit 9I/
I
GLU® Inuit 9WTI
ø6.35 ø 15.88
I
GLU® Inuit 12I/
I
GLU® Inuit 12WTI
ø 9.52 ø 15.88
I
GLU® Inuit 16I/
I
GLU® Inuit 16WTI
ø 9.52 ø 15.88

Install refrigerant pipe depending on the outdoor unit capacity.

Make sure to use C1220T-1/2H (Semi-hard) pipe for more than ø 19.05 mm. In the case of using a C1220T-O
(Soft) pipe for ø 19.05 mm, the pipe may be broken, which can result in an injury.

To prevent foreign materials or water from entering the pipe, pipes shall be sealed by caps
.
Temper grade and minimum thickness of the
refrigerant pipe
Outer
diameter
(mm)
Minimum
thickness
(mm)
Temper grade
ø 6.35 0.7
C1220T-0 ø 9.52 0.7
ø 12.70 0.8
ø 15.88 1.0
ø 15.88 0.8
C1220T-1/2H OR
C1220T-H
ø 19.05 0.9
ø 22.23 0.9
CUTTING OR FLARING THE PIPES

Make sure that you have prepared the required tools.

Pipe cutter, reamer, flaring tool, pipe holder, etc.

If you want to shorten the pipe, cut it with a pipe cutter ensuring that the cut edge remains at 90° with the side of
the pipe.

There are some examples of correct and incorrect cut edges below.

To prevent a gas leak, remove all burrs at the cut edge of the pipe with a reamer.
Face the pipe down while removing the burrs to make sure that burrs do not get into the pipe