IFM AL1120, Руководство по эксплуатации

Страница: 47 / 110

IO-Link Master with EtherNet/IP Interface StandardLine 4 Ports IP 65 / IP 66 / IP 67
47
>
Acyclic port commands
34336
For the acyclic access to the configuration of the IO-Link ports of the AL1120, the following commands
are available:
Command Description Reference
Set mode Set the operating type of the IO-Link port
→
Command 0x10
– Set mode
(
→ S.
80 )
Set Validation ID / Data Storage Adjust the supported IO-Link standard and
the behaviour of the IO-Link master when
connecting a new IO-Link device to the
IO-Link port
→
Command 0x20
– Set validation ID /
data storage (
→ S.
82 )
Set fail-safe data pattern Behaviour of the outputs when the
EtherNet/IP connection is interrupted and
setting of the corresponding fail-safe values
→
Command 0x30
– Set fail-safe data
pattern (
→ S.
84 )
The port commands use the same mechanisms as the acyclic command channel (
→
Acyclic
command channel (
→ S.
74 )).
>
EtherNet/IP mechanisms for acyclic commands
34404
Acyclic commands can be executed with the EtherNet/IP command Message (MSG) .
Parameters of the available field bus objects:
→
Field bus objects (
→ S.
86 )
For detailed information about the Message (MSG) command:
→ Operating instructions
RSLogix 5000