IEMCA KID 80, Руководство по эксплуатации и техническому обслуживанию

Страница: 59 / 82

6 - USE AND OPERATION KID 80
EN
6 - Pag. 9 / 14
6.10 AUTOMATIC CYCLE START
If the bar feeder conditions allow no automatic cycle start, please follow these instructions:
• Turn on lathe power supply.
• Rotate the bar feeder main switch to I (ON) position to connect the power supply.
• Press the button on the machine to start the bar feeder and hold it down until the
indicator-light on the push-button lights up.
• Press the button to select manual mode.
• If necessary, let the bar feeder devices reach the cycle start position.
• Press the button rapidly twice to carry out the “Bar Feeder Zero Setting”.
• Turn the selector switch to the left and leave it turned: the bar selecting unit, bar
drop control device and bar pusher are lifted.
• Turn the selector switch to the right and leave it turned: the bar is loaded and the
guide is lifted for pre-feeding.
• Turn the selector switch to the left and leave it turned: resetting the error on the
display, the bar pusher and the guide channel are lowered.
• Select the desired piece feeding mode (see parameter 29).
• Press the button to start the automatic cycle.