IEMCA KID 80, Руководство по эксплуатации и техническому обслуживанию

Страница: 41 / 82

4 - MOVEMENT AND INSTALLATION KID 80
EN
4 - Pag. 13 / 16
4.8.3 Alignment and levelling
INFORMATION:
not only alignment and levelling are fundamental for the correct running of the
bar feeder and for the WARRANTY VALIDITY, but also they must be carried out
only by a SKILLED STAFF WITH PRECISE TECHNICAL COMPETENCE.
For these operations proceed as follows.
- Position the bar feeder near the lathe (see figure).
- Put the four plates (A) under the end points of
the frame (see figure).
- Tighten the socket head screws. (B)
- Open the upper guard and manually shift the bar
pusher (C) until you bring its end close to the
spindle head (D).