IEMCA KID 80, Руководство по эксплуатации и техническому обслуживанию

Страница: 49 / 82

5 - ADJUSTMENTS AND SETTING UP KID 80
EN
5 - Pag. 5 / 6
Setting bar diameters of less than ø10 (between ø10 and ø5) the guides do not
move any further upwards: The bar may hence not be centred with the spindle
axis and could cause vibrations.
5.4 BAR FEEDER-LATHE GUIDE ADJUSTMENT
The adjustment must be carried out
according to the diameter of the
bar pusher bearings and bar to
be machined.
- Adjust the guide height,
displayed on the graduated rod
(A), in order to respect the
values reported in the table.
Bar feeder-lathe guide height table
Ø B
Diameter of bar
pusher bearings
(mm)
Ø C
Bar diameter (mm)
Bar guide channel
height
12 5÷12 12
10÷15 15
15
16÷19 16÷19 (*)
16÷21 21
21
22÷80 22÷80 (*)
(*) The height must be equal to the bar diameter (ø C).