
EN
6 - USE AND OPERATION
KID 80
6 - Pag. 8 / 14
6.9
LATHE SPINDLE LINER CHANGE
We recommend you to use a spindle liner in order to guide the bar correctly into the lathe.
This device is to be installed onto the lathe front side. The inner diameter of the reduction nose
must be one millimetre larger than the outer diameter of the bar pusher bearings (see "Bar and
bar pusher diameter table", chapter 2).
The replacement is carried out in the area between the lathe and the bar feeder; move the bar
feeder away, if it is equipped with a displacing device, otherwise proceed as indicated:
• Press
the
button to select manual mode.
• Turn and hold the selector switch
to the left to lift the bar selecting device, bar drop
control device and bar pusher.
• Press the bar feeder emergency stop button
to stop bar feeder operation in safe
conditions.
• Remove safety device (A) (if the bar feeder is
provided with a bar feeder-lathe guide).
• Open the upper guard.
• Remove the reduction nose (from bar feeder side)
and replace it.
• Reset the bar feeder to its regular operating
conditions.
Содержание KID 80
