IEI Technology ROCKY-6614 Скачать руководство пользователя страница 119

Страница: 119 / 204

-11

ROCKY-6614 CPU Card

119

Enabled

Displays OEM Logo instead of POST messages

AddOn ROM Display Mode [Force BIOS]

The

AddOn ROM Display Mode

option allows add-on ROM (read-only memory)

messages to be displayed.

Force BIOS

(Default)

Allows the computer system to force a third party

BIOS to display during system boot.

Keep Current

Allows the computer system to display the

information during system boot.

Bootup Num-Lock [On]

The

Bootup Num-Lock

BIOS option allows the Number Lock setting to be modified during

boot up.

Off

Does not enable the keyboard Number Lock automatically. To

use the 10-keys on the keyboard, press the Number Lock key

located on the upper left-hand corner of the 10-key pad. The

Number Lock LED on the keyboard will light up when the

Number Lock is engaged.

(Default) Allows the Number Lock on the keyboard to be enabled

automatically when the computer system boots up. This allows

the immediate use of the 10-key numeric keypad located on the

right side of the keyboard. To confirm this, the Number Lock

LED light on the keyboard will be lit.

PS/2 Mouse Support [Enabled]

The

PS/2 Mouse Support

BIOS option allows

the PS/2 mouse support to be adjusted.

Disabled

Disables PS/2 mouse support and prevents the PS/2

Содержание ROCKY-6614













































































































































































































Результаты поиска

Содержание ROCKY-6614

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology ROCKY-6614, Руководство пользователя

Результаты поиска

Содержание ROCKY-6614

Отзывы:

Бренды по названию

Популярные бренды