IDX CW-F25, Инструкция по эксплуатации

Страница: 51 / 82

References Setup menus - Transmitter
50
Details of the setup menus - transmitter
Wireless setup > Channel freq.
Setting frequency
Items 5190 (MHz)/ 5230 (MHz)/ Indoor DFS / Outdoor
DFS
5190MHz and 5230MHz are the frequencies for indoor use only.
If Indoor DFS selected, it automatically selects from seven frequencies of following.
Those frequencies allow to use in indoor.
5270, 5310, 5510, 5550, 5590, 5630, 5670MHz
If outdoor DFS selected, it automatically selects from five frequencies of following.
Those frequencies can be used in both indoor and outdoor.
5510, 5550, 5590, 5630, 5670MHz
DFS function enables Indoor and Outdoor DFS.
When DFS is selected, the system will scan the spectrum for available frequencies for
approximately 60 seconds. After scanning is complete, communication starts while the
frequency is automatically selected by the system.
Wireless setup > SSID
Setting SSID
Items
Enter the SSID. 1-16 characters.
Characters are alphabet, numbers, and other symbols.
Set the SSID for wireless LAN.
Default SSID is set at the factory.
Default SSID has been set to not overlap with other CW-F25 units. Therefore there is
no need to re-set the SSID for normal use.
If a space is entered between characters, the system will recognize the SSID characters
up to the space. Characters after the space will not be recognized. Ensure the character
string is the same on the transmitter and receiver. Power cycle after changing SSID.
Wireless setup > Password
Setting password
Items
Enter the Password for Wireless LAN. 8 - 16 characters.
Characters are alphabet, numbers, and other symbols.
Set password for wireless LAN.
Default password is set at the factory.
If a space is entered between characters, the system will recognize the password
characters up to the space. Characters after the space will not be recognized. Ensure the
character string is the same on the transmitter and receiver.