IDX CW-F25, Инструкция по эксплуатации

Страница: 61 / 82

References Setup menus - Receiver
60
Remote > Parity
Set parity
Items none / odd / even
Set parity of RS-422.
none no parity
odd odd parity
even even parity
Default value is "none".
Must match the baud rate of the RS-422 equipment.
Remote > Stop bit
Setting stop bit length
Items 1 / 2 (bit)
Set stop bit length of RS-422.
Default is 1 bit.
Must match the baud rate of the RS-422 equipment.
Intercom > Intercom
Setting intercom
Items ON / OFF
Set the intercom enable or disable.
Default is ON.
Intercom > Mic level
Setting microphone gain
Items 0(min) - 10(max)
Set the audio input gain of intercom.
Gain can be adjusted between 0 ~ 10. Default value is 8..
Intercom > Phone level
Setting headphone volume
Items 0(min) - 10(max)
Set the intercom audio output volume.
Volume can be adjusted in between 0~10. Default value is 8.
Status > About
Display info.