IDX CW-F25, Инструкция по эксплуатации

Страница: 37 / 82

Operation of CW-F25 GPI connection - as tally
36
5. GPI connection - as tally
The GPI input is located on the receiver and the GPI output is located on the transmitter.
The GPI signal feed to the receiver will transmit to and output from the transmitter.
The GPI output also can be used to output the status of the wireless connection. This
can be set in the settings menu.
1.
Install the antennas to transmitter and receiver.
P. 19 "Installation of antenna"
2. Connect the power supply to transmitter and receiver.
P.21 "Preparing for power supply"
3. Camera and monitor setup, etc..
P.28 "Basics", P.30 "Return video"
4. Connect a contact closure output from the switcher to receiver.
See example below.
5. Connect the transmitter and tally LED unit or a monitor which has tally input.
See example bellow.
6. Power ON the transmitter and receiver.
P.22 "Power on and Power off"