IDTECK iTDC, Руководство пользователя

Страница: 82 / 146

SETTING CHANGES
iTDC
p.75
USE (ZONE)
Door1 (2) Anti-pass-back mode is applied together.
If you select USE (ZONE) then the APB flag will be affected to Door1 and Door2.
DOOR2 APB mode is set automatically.
Example: When you select USE (ALONE) then Door2 entry is possible after you got
in through Door1. When you select USE (ZONE) then Door2 entry is not possible
after you got in through Door1. (APB error)
If you select ALL CLEAR then iTDC will clear all APB flags and all users are allowed to enter or
exit once regardless of access status.
DOOR2 APB mode set-up is the same as above.
1.3 KEYPAD INPUT SETTING
This function is to set DISABLE/ENABLE the keypad inputs from the Proximity and Keypad
Readers. The default setting is DISABLE. If you install Keypad Reader (8bit burst format) and
set this mode ENABLE, you can access the Door by pressing 8digit User ID from the keypads.
Press <ENT> key and press <4> or <6> key to select
->ENABLE then press <ENT> key to set-up this function.