IDTECK iTDC, Руководство пользователя

Страница: 15 / 146

p.8
FEATURES
iTDC
for the user who has once got into the door first and it doesn’t allow any user trying
twice entry or twice exit in a row. As it were, as 2 of card readers equipped on the
both sides of the entrance and exit of one door, the user has to let the card-reader
read the user card properly each time of entrance/exit so that only person who got in
with the card read by the card reader equipped on the entrance side can get out also
only by letting the card reader read the card for exit. When this rule was not kept, the
internal memory saves APB error. Also, when this kind of error happens, it is possible
to make the output on the specific output port. APB function can be used for 2 doors
each independently or linked together. (Refer to the Number of Door Control setting.)
Arm/Disarm Function for Alarm Panel
After setup of arm/disarm code, the user enters arm code and present special card ID
to the reader. The iTDC is set to arm condition and also generate output(s) for burglar
alarm system.
All readers in arm condition do not read any cards.
Arm/Disarm Input Function for Alarm Panel.
This is a function that controls Arm/Disarm by input signal. Arm/Disarm Input is fixed
to input #7, and you need to set it separately to use input #7 as Arm/Disarm Input.
Once you set input #7 as Arm/Disarm Input, iTDC becomes Arm by input signal ‘ON’
and becomes Disarm by input signal ‘OFF’. Arm/Disarm Input toggles Arm/Disarm
status.
Two Men Operation
This function allows visitors to enter and exit only with a companion of an authorized
guide.
The iTDC opens the door when two registered cards are read.
Duress Alarm
This function is used to notice any case that the door has to be opened by force. In
case of duress, enter the 2 digits Duress Password and <ENT> key before the normal
access process then the door will be opened as normal but the duress alarm is also
generated at the same time and the duress alarm output will be activated to TTL
output and alarm event will be sent to the host PC.
Advanced Time Schedule Setting
As specific time zone is set up, this function allows set-up action only within the set-up
time range. Upon each time schedule code, the user can select the time zone and
transfer to the device. For the time range of Monday to Friday and holiday (see Holiday
Schedule set-up), maximum 5 different time zones a day can be divided and set-up.