iDirect Evolution X1, Инструкция по установке и безопасности

Страница: 54 / 60

42 iDirect Evolution X1 Satellite Router Installation and Safety Manual
FCC Compliance
B.1 FCC Compliance
B.2 Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. The equipment uses,
generates, and radiates frequency energy. If the equipment is not installed and used in
accordance with the instructions, it may cause harmful interference to radio communications.
There is also no guarantee that interference will not occur in a particular installation. You can
determine if the equipment is interfering with radio or television reception by removing or
applying power to the equipment and seeing if the interference goes away, or returns, when
the unit is off or on.
To meet FCC requirements, only peripherals, such as computer input/output devices,
terminals, and printers certified to comply with the Class B limits, may be attached to this
device. Operation with non-certified peripherals is likely to result in interference to radio and
TV reception.
To meet FCC requirements, shielded cables are required to connect the device to a personal
computer, peripheral, or other Class B certified device.
The iDirect Evolution X1 Satellite Routers comply with Class B
of Part 15 of the FCC (Federal Communications Commission)
rules as is identified by use of the FCC logo.
Radiated and Conducted Emission
47CFR15 Class B, CISPR-22 Class B, EN55022 Class B.
Modification of this equipment without written authorization
from iDirect may result in this equipment no longer
complying with FCC requirements for Class B digital devices.
In that event, your right to use the equipment may be
limited by FCC regulations, and you may be required to
correct any interference to radio or television
communications at your own expense.