iDirect Evolution X1, Инструкция по установке и безопасности

Страница: 41 / 60

iDirect Evolution X1 Satellite Router Installation and Safety Manual 29
Configuring the Evolution X1 Satellite Router
4.10 Configuring the Evolution X1 Satellite Router
Now that you have installed the Evolution X1 Satellite Router, you are ready to install the
firmware and configure the satellite routes. For instructions on how to do this, refer to the
Satellite Router Commissioning Guide for your release. To download the guide, go to
http:\\tac.idirect.net and click Satellite Routers.
4.11 Maintaining the Evolution X1 Satellite Router
The IDU requires basic maintenance to keep it running efficiently and to prolong its life.
However, the only maintenance you need to perform on the unit, without explicit directions
from iDirect, is to maintain the temperature of the IDU and keep its external areas free from
dust or dirt.
Note: There are no user-serviceable parts within the iDirect Evolution X1 Satellite
Router. Do not attempt to repair/replace a malfunctioning or defective
component/module. Doing so may void the warranty.
4.11.1 Temperature Control
The IDU has a built-in temperature sensor. The temperature sensor measures the actual
circuit board temperature. If the board temperature exceeds a defined threshold, the IDU
alerts the NMS about the high temperature condition. See
Chapter 3, Specifications , for the
proper temperature range.
Various conditions can cause the IDU chassis to have an elevated internal temperature, such
as:
•
Objects blocking the enclosure vents
• Dust accumulated on the enclosure or the vents
• Ambient temperature elevated beyond the specified limits
4.11.2 Dust Removal
A dusty environment requires frequent maintenance. With the unit powered down, use a
slightly damp cloth with the excess moisture wrung out (not a saturated, dripping-wet cloth)
to wipe away the dust that collects on the outside of the enclosure.