iDirect Evolution X1, Инструкция по установке и безопасности

Страница: 37 / 60

iDirect Evolution X1 Satellite Router Installation and Safety Manual 25
Connecting AC Power to the IDU
Table 10 lists the pinouts for the Ethernet ports of the IDU chassis and shown in Figure 13 on
page 25 .
Figure 13. RJ-45 Cable Connectors, Plug and Receptacle
4.8 Connecting AC Power to the IDU
The IDU can be powered directly from the facility AC power source from 100 VAC to 240 VAC.
iDirect recommends that the chassis be powered from a low noise, low transient AC power
source.
Table 10. Ethernet Port Pinouts
RJ-45 Pin Description
1 Tx+
2 Tx-
3 Rx+
6 Rx-
Symbol Warning type Definition
WARNING/CAUTION Improper AC power source rating, excessive
noise or transients, or undersized circuit
breaker will result in service interruption.
WARNING/CAUTION If you must remove power from the chassis,
you should disconnect power using the AC
power cord.