IDEAL INDUSTRIES SignalTEK II, Руководство пользователя

Страница: 28 / 58

156810 Iss 1 SignalTEK II
Page 28 User Guide
When a SignalTEK II Remote
Unit is detected through an active
network, select the TESTS icon
from the home screen (Fig 46) to
display the Tests screen (Fig 47).
From the Tests screen select the
IP TEST icon to show the IP
Tests screen (Fig 48), or select
the DATA icon to show the
Performance
Tests screen
(Fig 49). The IP Tests are as
described on pages 26 and 27.
Each of the performance tests
operate on the principle that
follows: (1) Frames transmitted
to Remote Unit at calculated
Frame
Rate for specified
duration, (2) Frames looped back
by Remote Unit, (3) Received
frames checked and counted.
Before a Performance test is run,
the warning and dialogue that
follow are displayed:
This test will generate traffic
loading which may interfere
with other network users
CONTINUE? YES/NO
Select YES to continue with the
test and not display the warning
again until the next power cycle.
Select NO to not continue with
test and display the warning
again before another test is run.
Performance tests are as follows:
Fig 46 Fig 47
Fig 48 IP Tests
Fig 49 Performance Tests
VoIP
Fig 50 shows the result screen of a successful VoIP test.
Frame Size
and
Frame Fill
are fixed, and stated for reference only. The
Information rate,
IR (Mb/s)
, is variable and dependent on the number
of calls you have entered at set up.
Tx
states the number of frames
transmitted, the green indicator bar confirms that 100% of the frames
were sent.
Rx
states the number of frames received, the green
indicator bar confirms that 100% of the transmitted frames were
received. As all transmitted frames were received,
Error
states 0 and
its associated indicator bar remains uncolored and shows 0%.
Fig 50
www.vemco.pl