IDEAL INDUSTRIES SignalTEK II, Руководство пользователя

Страница: 11 / 58

SignalTEK II 156810 Iss 1
User Guide Page 11
(2)
When the Near-End Unit is connected to an
active network, using copper or fiber cable,
press the soft key DETECT (F1) to display all
options available (Fig 9). IP tests can be run.
For a full description of these options see
–
Tests menu description
– Ethernet mode, page
25.
The detected services are PoE (802.3af/at),
ISDN, PBX and Unknown. The IPv4 and IPv6
addresses assigned to the tester are displayed
(when available).
Fig 9
Fig 10
(3)
When both the Near-End Unit and Remote Unit
are connected to an active network, using copper or
fiber cables, press the soft key DETECT (F1) to
display all options available (Fig 10). IP tests and
performance tests can be run. For a full description
of these options see
–
Tests menu description
–
Ethernet mode, page 28.
The detected services are PoE (802.3af/at), ISDN,
PBX and Unknown. The IPv4 and IPv6 addresses
assigned to the tester are displayed (when
available).
www.vemco.pl