IDEAL INDUSTRIES SignalTEK II, Руководство пользователя

Страница: 10 / 58

156810 Iss 1 SignalTEK II
Page 10 User Guide
Press the soft key DETECT (F1) and the Near-End Unit will determine the mode of operation dependent
on the services detected. The display will show a home screen with one of four connection symbols.
There are two modes of operation, Cable and Ethernet. Cable has one way of connecting, Ethernet has
three.
Cable
Cable mode is used for Wiremap testing and
cable route tracing using the tone generator.
When the Near-End Unit is connected to a
copper cable, with or without an Active Remote,
press the soft key DETECT (F1) to display all
options available from the Cable mode screen.
When an Active Remote is connected it will be
shown on screen (Fig 7) and its identification
number displayed. For a full description of
these options, see
Tests menu description
–
Cable mode.
Fig 7
Ethernet
Fig 8
Ethernet mode is used for a range of IP and
performance tests. There are three ways to
connect in Ethernet mode:-
(1)
When the Near-End Unit and Remote Unit are
directly connected, with copper or fiber cable, press
the soft key DETECT (F1) to detect all options
available (Fig 8). In addition to wiremap tests
(copper), cable performance can be tested and
measured. For a full description of these options
see
Tests menu description
– Ethernet mode, page
24.
www.vemco.pl