Innovative Circuit Technology Ltd.
9
Main Screen
Line 1: The name of the panel (user configurable via the web based graphic
interface, default is “
ICT Dual Bus Panel
”)
Line 2: Displays the bus being monitored, Bus A or Bus B
Line 3: The system voltage (voltage will blink if the voltage exceeds the Under-
voltage or Over-voltage alarm thresholds)
Line 4: Total bus current (current will blink if the bus current exceeds the Over-
current alarm threshold)
Network Screen
Line 1: Network Status (
Network
Connected
,
No Network
)
Line 2: Connection type (
100Base-T
,
10Base-T
)
Line 3: IP address assigned to the panel
Line 4: MAC address of the panel
Output Screen (1A to 10A or 1B to 10B)
Line 1: Channel number, and name of load (User configurable, default is channel
number only)
Line 2: Channel output status (
ENABLED
,
DISABLED
to indicate internal relay state
or
FUSE OPEN
if the fuse for the channel has tripped)
Line 3: Output voltage (voltage will blink if it exceeds the Over or Under-voltage
alarm thresholds)
Line 4: Channel Output current (current will blink if it exceeds the Over, or Under-
current alarm threshold for that channel)
Each output channel may be given a unique name to describe the actual load
connected using the Output Setup section of the web-based interface.
Site Alarm Input Screen (1 to 5)
The alarm screens are displayed only if the alarm input has been enabled using the
Alarm Setup section of the web based graphic interface
Line 1: Alarm input number (1 to 5)
Line 2: Name of the alarm (if configured, default is blank)
Line 4: Alarm Status (
ALARM
if alarm is triggered,
READY
when not triggered)