Innovative Circuit Technology Ltd.
28
5.
Determine the WAN IP address of the router assigned by the ISP. With the
example router this information is on the
Status
tab, listed as
IP Address
.
NOTE:
When using a dynamic IP address the router’s WAN IP address may change
from time to time without warning, depending on the ISP. In this case, obtain
a Static IP address from the ISP (it will not change) which will ensure more
predictable access to the panel from a remote location. If a static IP address is
not available, use a Dynamic DNS service such as Dyn (
) to
provide a stable address for the router.
6.
To access the panel over the internet type the WAN IP address of the
router in the location/address field of the browser, followed by a colon
and the HTTP port number the panel is using. (e.g.
for a router address
209.123.10.33
, port
8000
)
Panel Access With Router Address
TEXT MESSAGE ALARM NOTIFICATIONS
The panel can send alarm notifications as text messages to a cell phone by
configuring the alarm e-mails to be sent to a mobile phone service provider.
On the
E-mail Setup
page of the web-based utility enter the address of a phone in
the
Recipient E-mail Address
field.
Example with an AT&T phone: enter the recipient address
replacing
cellnumber
with the 10-digit cell phone number which will be used to
receive messages.
Cell address formats for some common North American mobile phone providers:
AT&T
cellnumber
@txt.att.net
Verizon
T-Mobile
cellnumber
@tmomail.net
Virgin Mobile
cellnumber
@vmobl.com
Nextel
cellnumber
@messaging.nextel.com
Bell Mobility
cellnumber
@txt.bell.ca
Rogers
cellnumber
@pcs.rogers.com