ICS ELECTRONICS 4807, Инструкция по эксплуатации

Страница: 18 / 165

1-13
1
1.11 CONFIGURABLE FUNCTIONS
Setup configuration parameters are saved in nonvolatile Flash memory.
Table 1-1 lists the 4807/4867's configuration parameters and their factory
settings. Table 1-2 lists the 2307/2367's configuration parameters.
TABLE 1-1 4807/4867 CONFIGURATION PARAMETERS
Command Function Factory Setting
:ADDRess Sets 4807's GPIB address 4
:EXTernal Enables external address switch OFF
:INPut Sets number of Talk bytes 4 #
:POLarity Sets Input polarity 1 #
:TALK Selects Input Format HEX #
:OUTput Sets number of Listen bytes 0 #
:POLarity Sets Output polarity 1 #
:LISTen Sets Output Format HEX #
:LIMit Output voltage 10 #
:OFFSET Output voltage offset 0 #
:SLOPe Output voltage scale factor 1 #
:RANGe Measure voltage range 10 #
:POLarity Measure voltage range polarity 2 #
:AVERage Averaging value (temp/A/D) 16/32 #
:LOCK Blocks # items from changes Off
:IDN Sets user's IDN message ICS IDN msg #
:QUES Reg Enables digital signal changes 0 *
:PTRANSISTION Enables positive going inputs All 1s *
:NTRANSISTION Enables negative going inputs All 0s *
*ESE Enables events to generate an SRQ 0
*SRE Enables Summary bits to generate 0
an SRQ
* Indicates parameters that cannot be saved in the unit's nonvolatile memory.
# Indicates parameters that may be blocked by the LOCK command.