ICP GDT RS Series, Руководство пользователя

Страница: 79 / 186

79
1. Find the ICPCON.EXE file in the DRIVERS\WIN95 directory on the ICP System CD.
2. Copy ICPCON.EXE to your Host Drive. Start the ICPCON program.
3. Press ENTER to select the Controller. Press ENTER to select the Protocol.
4. Press ENTER to select the Controller installed.
5. Highlight View/Change Settings and press ENTER .
6. Highlight Cache Settings and press ENTER .
7. Highlight Delayed Write . Use the space bar to toggle setting to ON .
8. Press ENTER two times. Delayed Write is now enabled.
9. Highlight Save Information and press ENTER .
10. Type the file name ICP001 and press ENTER . *NOTE: This creates a "snapshot” of your
system configuration. Anytime the configuration changes (i.e. add a new hard drive,
hard drive failure, change system parameters, etc.) save the information again, using the
ICP header for the file and the next higher number (i.e. ICP001, ICP002, ICP003, etc.).
This information will be needed by ICP Technical Support personnel to assist you in
troubleshooting problems with the controller.
11. Press Esc two times to exit the ICPCON program.
D.7.2 The ICP Controller is the secondary controller
1. Transfer the WIN95 files from the ICP System CD to a 3.5” floppy disk. The files are lo-
cated in the directory, (your CDROM drive letter):\DRIVERS\WIN95. You will need this
disk later in the Windows 95 Setup.
2. In Windows 95 double click on My Computer icon. Double click Control Panel icon.
3. Double click the System icon. Click the Device Manager tab.
4. Double click Other Devices . Double click PCI SCSI Bus Controller .
5. Click Driver . Click Change Driver . Double click SCSI Controllers .
6. Click Have Disk . Insert the ICP Windows 95 driver disk you created in step 1.
7. Click OK . Click OK again. Click OK again.
8. Click Cancel . Never click Test. Windows 95 is unable to determine if the ICP BIOS
can be removed. Using the Test option may cause the system to freeze.
12. Remove the ICP Windows 95 driver disk. Restart the system.
D.7.3 Update the ICP Windows 95 Driver
1. Download the WIN95.EXE file from the ICP web site (http://www.icp-vortex.com). This
self-extracting file contains all the Windows 95 files you need.