ICP GDT RS Series, Руководство пользователя

Страница: 44 / 186

44
ƒ
The factory set SCSI ID of the ICP Controller SCSI channel is 7.
ƒ
Up to 15 SCSI devices can be connected to the Wide/Ultra2 and Ultra 160 SCSI channels
ƒ
Up to 15 SCSI devices can be connected to the Wide/Ultra SCSI channel. In reality this
number is limited to max. 7.
If it is intended to operate on this bus also Wide/Ultra2 or Ultra 160 disk drives, you
must set the "SE" jumper on each Wide/Ultra2 disk drive. On IBM drives e.g., this jumper
is called "SE Mode".
On hard disks, CD-ROMs, tape streamers, etc., the SCSI ID is normally set through jumpers
or small DIP switches. The ICP Controllers offer a far more comfortable method: software
switches in the ICP RAID Console or ICP RAID Navigator programs allow you to easily set
the SCSI ID of an ICP SCSI channel. It is recommended to leave the default ID value at 7
(allowed values 0, 1, 2, 3, 4, 5, 6 and 7). Some operating systems require that the SCSI ID of
certain SCSI device (e.g., tape streamer, CD-ROM) is set to a particular value (for more in-
formation, please refer to the appropriate chapter in this manual).
B.4.4 ICP SCSI Accessories
Order # Part Name Description Application
8839 Wide/Ultra2
and Ultra 160
Flat Ribbon
Cable 150 cm Wide/Ultra2 and Ultra 160 SCSI
cable with seven 68 pin HD SCSI connec-
tors (male). Connection of up to 5 internal
Wide/Ultra2 and Ultra 160 SCSI de-
vices per SCSI channel and one
SE/LVD terminator (Order No.:
8951).
For LVDS operation.
8840 Fast-SCSI
Bracket Bracket with an internal 50 pin header
and an external 50 pin HD SCSI connector
(female). Connection of an external Nar-
row/Ultra SCSI subsystem with an
internal Narrow/Ultra channel.
Not for LVDS operation.
8841 Wide-SCSI
Adapter 16 Bit to 8 Bit SCSI adapter with a 50 pin
header and a 68 pin HD SCSI connector
(male). Connection of Wide/Ultra SCSI de-
vices with an 8 Bit 50 pin flat ribbon
cable.
Not for LVDS operation.
8842 Wide-SCSI
Bracket Bracket with an internal and an external
68 pin HD SCSI connector (female). Connection of an external
Wide/Ultra SCSI subsystem with an
internal Wide/Ultra channel.
Not for LVDS operation.
8843 Wide/Ultra
Flat Ribbon
Cable 80 cm Wide/Ultra SCSI cable with four 68
pin HD SCSI connectors (male). Connection of up to 3 internal
Wide/Ultra SCSI devices per SCSI
channel.
Not for LVDS operation.
8844 Wide/Ultra2
and Ultra 160
Round Cable 3 meters Wide/Ultra2 and Ultra 160 Round
Cable with stackable 68 pin VHD SCSI
connector (male) and 68 pin HD SCSI
connector (male). Both with thumb
screws. Connection of an external
Wide/Ultra2 and Ultra 160 SCSI sub-
system.
For LVDS operation.
8877 Wide/Ultra2
and Ultra 160
Round Cable 1 meter Wide/Ultra2 and Ultra 160 Round
Cable with stackable 68 pin VHD SCSI
connector (male) and 68 pin HD SCSI
connector (male). Both with thumb
screws. Connection of an external
Wide/Ultra2 and Ultra 160 SCSI sub-
system.
For LVDS operation.
8845 Wide/Ultra2
and Ultra 160
SCSI Bracket Bracket with two internal 68 pin HD SCSI
connector (female) and two external 68
pin VHD SCSI connectors (female). Connection of external Wide/Ultra2
and Ultra 160 SCSI subsystems.
For
LVDS operation.