9
Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - [email protected]
Document version: 1.0
User Guide for 1.17.3 Firmware
Figure 8.
System information
item of the
Status
menu
The
System counters
section contains statistical information about data entering and leaving the interfaces of the
CPE, as well as error and collision counters:
•
Status
: current status of a given interface, either
Up
or
Down
,
•
Pkts in
: number of incoming packets in the current session,
•
Pkts out
: number of outgoing packets in the current session,
•
Errors
: transmission error counter,
•
Collisions
: collision counter,
•
Speed
: negotiated speed (
FD1000
- Full Duplex at 1000Mbps,
FD100
- Full Duplex at 100Mbps,
FD10
- Full
Duplex at 10Mbps,
HD100
- Half Duplex at 100Mbps,
HD10
- Half Duplex at 10Mbps).
The data under information menu can be refreshed at any time by clicking the
Refresh
button.
As this menu does not include any configurable options the
Reset
,
Save
, and
Apply
buttons are disabled.
WAN information
The
WAN
item of the
Status
menu lists basic information about WAN interface as well as the statistics of data
carried through the interface.
Figure 9.
WAN
item of the
Status
menu
The
WAN
section presents basic information about the WAN interface:
•
WAN IP type
: IP address type of the WAN interface,
•
IP address
: IP address used by the WAN interface,
•
Subnet mask
: subnet mask used by the WAN interface,
•
Default gateway
: default gateway configured for the WAN interface,
•
MAC address
: interface’s physical address,
