15
Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - [email protected]
Document version: 1.0
User Guide for 1.17.3 Firmware
•
SS
: number of spatial streams supported by the host,
•
BSSTr
: support for 802.11v BSS Transition management by the host,
•
Associated to
: BSSID of the AP to which client is connected to,
•
RSSI
: Received Signal Strength Indicator,
•
TX bytes
: transmitted bytes,
•
TX rate
: transmission rate,
•
TX failed
: transmission failures,
•
RX bytes
: received bytes.
The
Associated clients
section can be refreshed at any time with the
Refresh
button.
Managing LAN and Wi-Fi settings
The
Settings
menu provides advanced configuration options to control Layer 3 network parameters of the cabled
and Wi-Fi network. It also allows to upload and download configuration files.
LAN settings
LAN
item of the
Settings
menu allows to modify parameters of the Local Area Network.
Figure 15.
LAN
item of the
Settings
menu
•
IPv4 Type
: if the
DHCP server
option is selected (default configuration), all hosts connected to LAN ports
or over WiFi interface will obtain their IP addresses and other necessary information automatically. In order
to change this setting choose the
Static
option from the drop-down menu and enter all network parameters
manually,
•
IP address
: specifies IP address of your network,
•
IP netmask
: specifies network mask,
•
Gateway
(only for dynamic IP configuration): specifies IP address of your network gateway,
•
Primary DNS
(only for dynamic IP configuration): specifies primary Domain Name System server to be used to
resolve DNS queries,
