Icom SB-110, Инструкция по эксплуатации, Страница: 88 / 102

76
MAINTENANCE
6
6-6 Upgrading SB-110 (continued from the previous page)
■
How to Update
1. Check that SB-110 is operating in the [Use utility] mode. Then, connect a PC to SB-
110 through cable or by wireless and start the operating system.
2. Start [SB-110 Utility].
For how to start it, refer to "To Start Utility" in the "CD-ROM of SB-110" (
☞
see 6-1).
¡ The operation screen of Utility is shown. (Refer to the screen.)
3. Click the [Firmware Update] radio button.
Enter a link to a downloaded new configuration file (extension: dat) of SB-110 in the
[Firmware File Name] text box directly or click [...] to select the file. Then, enter the IP
address of SB-110 in the [SB-110 IP Address] text box and click [Start]. (Refer to the
screen.)
Enter
2.
Enter
3.
4. When the message "Firmware update has been completed." has been displayed on
the [SB-110 Utility] screen, the initialization of SB-110 ends.
[Time required for update]
Time elapsed to reboot the system since the firmware data file was transferred to SB-110
from a wired or wireless terminal is as follows:
¡ Transfer: 30 to 60 seconds
¡ Reboot: 30 seconds
Click
1.
Click
4.
PDF取説-E̲1 02.1.23 10:28 ページ76