Icom SB-110, Инструкция по эксплуатации, Страница: 25 / 102

13
INSTALLATION AND CONNECTION
2
2
2-4 Before Connecting Existing LAN
When you connect SB-110 to an existing LAN, you need to assign the IP address to SB-
110 according to the IP address assignment system specified in the LAN in advance.
* To change the IP address of SB-110, refer to "How to Change IP Address" (
☞
see 4-5).
[Connection to environment that fixed IP address is assigned]
Assign an available IP address to SB-110.
[Connection to environment that the DHCP server function is used]
Change the SB-110 setting to disable the DHCP server function and assign an IP address
which is not assigned automatically.
■
Checking Network Status
When a network is built on an existing LAN, please note the points below:
[IP address of each PC on LAN]
For TCP/IP, if an IP address of a network device (e.g., PC) on the network is the same as
that of SB-110, any communication cannot be made between SB-110 and such network
device. Moreover, the entire network may be affected.
If any network device on an existing network has the IP address [192.168.0.1], you need to
change the default IP address of SB-110 (
☞
see 4-5) before connecting SB-110 to such
existing network.
When you assign an IP address to network devices statically, take care not to assign the
same IP address to those network devices. Even when you assign the IP address dy-
namically, you need to change the setting so that the IP addresses assigned by the DHCP
server function are different from the IP address of SB-110. Please note that the broadcast
address cannot be assigned to any device on the network.
■
Setting IP Address
When the IP address of any other network which you want to connect is the same as that
of SB-110, change the IP address into one specified in the LAN.
* For how to set it, refer to "How to Change IP Address" (
☞
see 4-5).
■
Connecting to Existing LAN
Connect to the LAN referring to "How to Connect" (
☞
see 2-3).
PDF取説-E̲1 02.1.23 10:28 ページ13