Icom SB-110, Инструкция по эксплуатации, Страница: 39 / 102

27
SETTING YOUR PC
3
3
3-2 Connecting through Wireless Access Point
■
Setting Wireless LAN Card
The values of the setting items below of your PC (PC/AT compatible machine) to be con-
nected through the wireless LAN must be the same as those of SB-110. Change the set
values of the PC according to the default setting of SB-110. For how to change the set val-
ues of PC, refer to the instruction manual of your wireless LAN card.
[Network Mode]
Communication is made to a repeater called "Wireless Access Point". Set your PC in the
Infrastructure mode. The wireless communication mode of SB-110 needs to be changed
(
☞
see 4-3).
[ESS ID]
PCs with the same name are identified as the same work group on the wireless network.
Change the PC setting into "LG". The default setting of SB-110 is "LG".
[Communication Channel]
This is disabled for the communication in the Infrastructure mode. The wireless commu-
nication is made according to the communication channel (
☞
see 5-2) set in SB-110.
[WEP Function]
When communication is made through a wireless LAN, the communication data is en-
crypted. Disable the WEP security of your PC. The default setting of SB-110 is "Not Use
WEP Key".
【
R
Remarks
】
¡ Wireless communication to Macintosh is unavailable.
¡ Use a suitable wireless LAN card which supports SB-110. Otherwise, no communication can be made.
¡ Write down the value set in SB-110 exactly and be sure to set such value in all the devices to be com-
municated by wireless.
¡ While you are changing [Communication Channel], [ESS ID] or [WEP] of SB-110, communication from a
PC connected to SB-110 through a wireless LAN becomes unavailable temporarily. The connection is
ready again when the setting of every device becomes the same.
¡ When the WEP function is not used, a third party may connect from the outside. You may encounter a
risk, e.g., unauthorized access, wiretapping, interference, data loss or memory crash. To avoid such
risk, it is recommendable to use the WEP function without fail.
¡ To communicate with SB-110 by wireless through the WEP function, our wireless LAN card must be
used.
¡ When an operation has become unstable during the wireless communication, move SB-110 or the PC or
change the direction of them.
¡ When many PCs access the wireless LAN of SB-110 simultaneously, the communication speed may
decrease considerably. The maximum number of wireless terminals used simultaneously is 256. How-
ever, it is recommendable to use ten terminals or less.
PDF取説-E̲1 02.1.23 10:28 ページ27