Icom SB-110, Инструкция по эксплуатации, Страница: 50 / 102

38
SETTING SB-110
4
4-5 Changing IP Address Of SB-110
If SB-110 is used in the default setting when you connect an existing LAN, the IP address
of SB-110 may be the same as that assigned to an existing network device. This section
describes how to change the IP address of SB-110.
* When you change the network section of the IP address, if the DHCP server of SB-110 is
enabled, you need to change also the network section of the automatic assignment start IP
address referring "Changing Automatic Assignment Start IP Address" (
☞
see 5-9).
<How to change.
1. Access the SB-110 setting screen according to the procedure described in 4-1 and 4-2.
¡ The [Wireless LAN Settings] screen is shown.
2. Click [IP address] in the left frame.
¡ The [IP address] screen is shown.
3. Change the IP address of SB-110 and click [Set & Reboot].
¡ "The IP address has been changed. Change the computer setting." is displayed on
the screen.
4. If the DHCP server function of SB-110 is enabled, obtain the IP address again using
"winipcfg.exe" (
☞
see 3-4) or restart the PC. If the IP address is assigned to the PC
manually, change the IP address of the network section of such PC according to that of
SB-110
【 How to Assign IP Address 】
The IP address consists of two elements, i.e., the network section and host section. For "192.168.0.1"
(Class C) which is the default IP address of SB-110, the first part "192.168.0" is the network section and the
second one "1" is the host section. Any network devices (e.g., PC etc.) which have the same network sec-
tion are presumed to be on the same network. Every network device on the same network is identified by
the host section.
So, when you assign the IP address, consider the following rules:
¡ Every network device located on the same network must have the same network section.
¡
Every network devices be located on the same network must have the unique host section.
¡ Do not assign any network address (the first position of the host section, "0").
¡ Do not assign any broadcast address (the last position of the host section, "255").
Change
2.
Click 1.
Not need to be changed
unless routing mode is
used.
Click
3.
PDF取説-E̲1 02.1.23 10:28 ページ38