Icom SB-110, Инструкция по эксплуатации, Страница: 54 / 102

5-1 [Wireless LAN settings] Screen
■
Wireless LAN setting
42
SETTING SCREEN
5
Select a wireless communication mode (default setting: no).
¡ [no]:Select for the Building Communication (Bridge) mode.
¡
[yes]:Select for the Access Point mode.
Enter an ID to prevent an unauthorized access to the wire-
less LAN connected to SB-110. This ID is case-sensitive.
Enter a maximum of 31 alphanumeric characters (default
ID: LG).
The entered characters are all expressed as a asterisk
(e.g., **).
In the Building Communication mode (
☞
see 1-3), several
SB-110s with the same [ESS] ID can be connected to
each others by wireless. In the Access Point mode (
☞
see 1-4), SB-110 and a wireless terminal can be con-
nected by wireless.
To enable the changed settings, you need to reboot SB-
110.
To prevent an error in typing the ID, enter the [ESS ID] again
in this field. Please note that the ID is case-sensitive.
(The entered ID is expressed as a asterisk, e.g., **.)
q
Using AP mode ……
w
ESS ID ………………
e
ESS ID confirmation …
q
w
e
Setting for wireless section of SB-110.
PDF取説-E̲1 02.1.23 10:28 ページ42