Icom SB-110, Инструкция по эксплуатации, Страница: 75 / 102

5-5 [Administration] Screen (continued from the previous page)
■
SYSLOG
63
SETTING SCREEN
5
5
Specify whether debug information is output to SYSLOG
or not (default setting: Yes).
Specify whether a message of INFO type is output to
SYSLOG or not (default setting: Yes).
Specify whether a message of NOTICE type is output to
SYSLOG or not (default setting: No).
If the SYSLOG function is used, enter an address of a
host which receives SYSLOG.
The host must be able to support the SYSLOG server
function.
Enter a numerical value in a range between 0 and 23 as a
facility of SYSLOG. Usually, enter "1" (default setting: 1).
q
Use DEBUG ………
w
Use INFO
…………
e
Use NOTICE ………
r
Host Address
……
t
Facility ………………
q
w
e
r
t
Perform the setting to output log information, etc. to a
specified host address.
PDF取説-E̲1 02.1.23 10:28 ページ63