Icom SB-110, Инструкция по эксплуатации, Страница: 61 / 102

49
SETTING SCREEN
5
5
5-2 [Detail settings] Screen
■ Custom Security (continued from the previous page)
Specify a key and character string used for encryption (de-
fault setting: 1).
To encrypt data, use the alphanumeric characters of hexa-
decimal notation displayed in the checked [Key Selection]
text box. The other party can decrypt the encrypted data
(receive it correctly) only when the same alphanumeric
characters of hexadecimal notation are displayed in any
of text boxes next to the [Selection (Key)] numbers (1 to
4).
In each text box, enter directly a key (alphanumeric char-
acters) of hexadecimal notation used for encryption and
decryption by the other communication party. If the [Num-
ber of Encryption Bits] settings of the communicating de-
vices are different from each others or if the contents of
the text boxes of those communicating devices, which are
used for the encryption and decryption, are different from
each other, no communication can be made.
It is advisable to apply the same settings to all the text
boxes of the communicating devices. If the contents of
those text box are the same, the communication can be
made between them even when their key numbers are dif-
ferent from each others.
* You may enter data in each text box next to the [WEP
Key], instead of the text box of [Key Generator] of [Detail
Settings]. (In this case, any character string is not dis-
played in the text box of [Key Generator].)
* For an example of setting, refer to page 52.
t
WEP Key ……………
PDF取説-E̲1 02.1.23 10:28 ページ49