Icom SB-110 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 102

Icom SB-110 Скачать руководство пользователя страница 4

iii

INTRODUCTION

FCC INFORMATION

SB-110

Tested to comply with

FCC standards

FOR HOME OR OFFICE USE

CAUTION:

Changes or modifications not expressly approved by Icom Inc. could

void the user’s authority to operate this SB-110.

Class B digital device users;
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

RF EXPOSURE SAFETY INFORMATION:

CAUTION: To comply with the FCC RF exposure requirements, this transmitter (built-in
antenna) must be fixed-mounted on permanent structures with a separation distance of
at least 8 inches (20cm) from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.

For CANADA only

Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.

PDF取説-E̲1 02.1.25 10:00 ページiii

«
...
2
3
4
5
6
...
»

Содержание SB-110







































































































Отзывы:

Нет отзывов