Icom MR-1210RII Скачать руководство пользователя страница 74

Страница: 74 / 80

OPEN SOURCE LICENSE

■

About "iana-etc"

ABOUT
The iana-etc package installs services(5) and protocols(5) using

data from the Internet Assigned Numbers Authority <http://www.

iana.org/>. In future, other such files may be added.

Included are snapshots of the data from the IANA, scripts to

transform that data into the needed formats, and scripts to fetch

the latest data.

  Maintainer: Seth W. Klein <[email protected]>
  Home Page: http://www.sethwklein.net/projects/iana-etc/
  Bug reports and patches are welcome.
PORT ALIASES
   Please report any additional port aliases that you need. The

port-aliases file contains the current list. To minimize cruft, it in-

cludes only aliases for which there has been reported need.

If you need an alias that isn't included, you may see the error:

getaddrinfo: Servname not supported for ai_socktype

Some useful things for finding out what alias is needed:

* strace from <http://www.wi.leidenuniv.nl/~wichert/strace/>

* grep -r 'getaddrinfo' in the appropriate source tree
The various RFCs and such usually list the number for an alias

but it may be faster to just check the FreeBSD services file at

<http://www.freebsd.org/cgi/cvsweb.cgi/src/etc/services>.

Bug reports and patches are welcome at the maintainer address

listed above.

DEPENDENCIES
GNU Awk 3.1.0 or Later

Numerous GNU Awk extensions are used. Awk was chosen

over Perl for its smaller size and more flexible installation

process both of which are important in a bootstrap environ-

ment.

Version 3.1.0 or later is required for support of the third argu-

ment to match(). The workaround to support older versions

would be less readable and slower so I'd rather not include it

without good reason.

Like GNU Awk before 3.1.0, Mawk doesn't support three ar-

gument match() and so is not supported. It also doesn't sup-

port network extensions.

Make

Testing is only done with GNU Make but incompatibilities

with other make implementations are bugs. Please send

patches.

■

About "freetype"

The FreeType 2 font engine is copyrighted work and cannot be

used legally without a software license. In order to make this proj-

ect usable to a vast majority of developers, we distribute it under

two mutually exclusive open-source licenses.
This means that *you* must choose *one* of the two licenses de-

scribed below, then obey all its terms and conditions when using

FreeType 2 in any of your projects or products.
- The FreeType License, found in the file `FTL.TXT', which is

similar to the original BSD license *with* an advertising clause

that forces you to explicitly cite the FreeType project in your

product's documentation. All details are in the license file. This

license is suited to products which don't use the GNU General

Public License.

Note that this license is compatible to the GNU General Public

License version 3, but not version 2.

- The GNU General Public License version 2, found in `GPLv2.

TXT' (any later version can be used also), for programs which

already use the GPL. Note that the FTL is incompatible with

GPLv2 due to its advertisement clause.

The contributed BDF and PCF drivers come with a license similar

to that of the X Window System. It is compatible to the above two

licenses (see file src/bdf/README and src/pcf/README).
The gzip module uses the zlib license (see src/gzip/zlib.h) which

too is compatible to the above two licenses.

■

About "firmware-imx & gpu-viv-bin-mx6q"

This is a legal agreement between you, as an authorized represen-

tative of your employer (together "you"), and Freescale Semicon-

ductor, Inc. ("Freescale") and its Affiliates. It concerns your rights

to use this software and any accompanying written documentation

(the "Licensed Software"). In consideration for Freescale allowing

you to access the Licensed Software, you are agreeing to be bound

by the terms of this Agreement. If you do not agree to all of the terms

of this Agreement, do not download the Licensed Software. If at any

point you no longer agree to all the terms of this Agreement, stop us-

ing the Licensed Software immediately and delete all copies of the

Licensed Software in your possession or control. Any copies of the

Licensed Software that you have already distributed, where permit-

ted, and that have not been destroyed, will continue to be governed

by this Agreement. Your prior use of the Licensed Software will also

continue to be governed by this Agreement.
Section 1.

Definitions

1.1

"Affiliate" means, any corporation, or entity directly or indi-

rectly controlled by, controlling, or under common control

with Freescale.

1.2

" Authorized Employees" means your employees or contrac-

tors working at your premises on your behalf under a work

for hire agreement.

1.3 "

Authorized System" means the hardware system(s) or

software program(s) marketed by you which contains an

i.MX processor and for which the Licensed Software will be

adapted by Licensee pursuant to this Agreement and with

which the Licensed Software will be integrated.

1.4

"Essential Patent" means a patent to the limited extent that

infringement of such patent cannot be avoided in remaining

compliant with the technology standards implicated by the

usage of any of the Licensed Software, including optional

implementation of such standards, on technical but not com-

mercial grounds, taking into account normal technical prac-

tice and the state of the art generally available at the time of

standardization.

1.5

"Intellectual Property Rights" means any and all rights under

statute, common law or equity in and under copyrights, trade

secrets, and patents (including utility models), and analo-

gous rights throughout the world, including any applications

for and the right to apply for, any of the foregoing.

1.6

"Licensed Software" means the software and the associated

documentation.

1.7 "Agreement" means this document and the following Ap-

pendices which are attached hereto and included herein by

reference:

Appendix A : Other License Grants and Rights

Section 2.

Licenses

2.1

Separate license grants and rights to Third Party Software,

if different from those granted in this Section 2, are as identi-

fied on Appendix A.

2.2 For Freescale Licensed Software, Freescale grants you a

world-wide, personal, non-transferable, non-exclusive, li-

cense, under Freescale's Intellectual Property Rights:

(a) to use, only as part of, or integrated within, Authorized Sys-

tems and not on a stand alone basis, the Licensed Software;

(b) to reproduce, only as part of, or integrated within, Authorized Sys-

tems and not on a stand alone basis, the Licensed Software;

(c)

to directly or indirectly manufacture, demonstrate, copy,

distribute, market and sell the Licensed Software in object

code (machine readable) only as part of, or embedded

within, Authorized Systems in object code form and not on

a stand alone basis. Notwithstanding the foregoing, those

files marked as .h files ("Header files") may be distributed in

source or object code form, but only as part of, or embedded

within Authorized Systems.

(d) to copy, use and distribute as needed, solely in connection

with an Authorized System, the proprietary information for

the purpose of developing, maintaining and supporting Au-

thorized Systems with which the Licensed Software is inte-

grated.

Содержание MR-1210RII

















































































Результаты поиска

Содержание MR-1210RII

Отзывы:

Похожие инструкции для MR-1210RII

Бренды по названию

Популярные бренды

Icom MR-1210RII, Инструкция по эксплуатации

Результаты поиска

Содержание MR-1210RII

Отзывы:

Похожие инструкции для MR-1210RII

Бренды по названию

Популярные бренды