1
PANEL DESCRIPTION
1
q
POWER SWITCH [
]
(p. 16)
Push to turn the radar power ON or OFF.
• The initial screen is displayed and a beep sounds after
the power has been turned ON.
• The magnetron inside the scanner unit warms up for 90
seconds and the warm up time is counted down on the
screen.
w
TRANSMIT/SAVE KEY [TX (SAVE)]/ [
]
➥
Push to toggle between the TX mode and the
standby mode. (p. 16)
➥
Hold down for 1 second to turn ON the power
save function. The radar for TX interval scan is
fixed at 10 revolutions. (p. 22)
• Select the save time in the System menu.
e
RANGE UP/ DOWN KEYS [+]/[–]/
[
]/[
]
(p. 16)
Push [
+
] to
increase the screen range.
Push [
–
] to decrease the screen range.
r
UP, DOWN, LEFT, RIGHT KEYS [
p
] [
q
] [
t
] [
u
]
➥
Sets the EBLs, VRMs, alarm area, ATA target,
AIS target, and so on.
➥
In the Menu screen, push [
t
] or [
u
] to select
the Menu group, or push [
p
] or [
q
] to select the
menu items.
➥
In the normal operating mode, push a combina-
tion of the [
p
]/[
t
], [
p
]/[
u
], [
q
]/[
t
], or [
q
]/[
u
]
to move the cross line cursor to the upper left,
upper right, lower left, or lower right.
t
CLEAR KEY [CLEAR]/[
]
➥
In the Menu screen, push to cancel the Submenu
or Option selection mode. (p. 5)
➥
Hold down for 1 second to turn the activated AIS
target into a sleeping target. (p. 38)
• Hold down [ENTER]/[
] for 1 second to change
the sleeping AIS target to an activated target.
➥
Hold down for 1 second to release the ATA target
or delete the TLL mark. (pp. 32, 52)
y
TRAILS KEY [TRAILS]/[
]
(p. 21)
➥
Simultaneously push [ENTER]/[
] and
[CLEAR]/[
] to turn the trail function ON or
OFF. This is useful for watching other vessel’s
tracks, and approximate relative speed.
• The Trail settings can be changed in the Trail menu.
➥
Hold down [ENTER]/[
] and [CLEAR]/[
]
for 1 second to erase the plotted echoes when
the trail function is ON.
u
MODE•ACQUIRE TARGET KEY [MODE•ACQ]/
[
•
]
➥
Push to select the Head-up (H-UP), Stabilized
Head-up (SH-UP), Course-up (C-UP), North-up
(N-UP) or True motion (TM) screens.
• The North-up, Stabilized Head-Up, and Course-up
screens can be selected only when a bearing data
input is connected. (pp. 42, 63)
• The TM screen requires bearing data or position data.
(pp. 42, 63)
• The TM screen is not selectable in the 32 NM or higher range.
➥
Hold down for 1 second to acquire an ATA target
on the cursor. (p. 32)
• Hold down [CLEAR]/[
] for 1 second to release
the ATA target.
TX
SAVE
ENTER
CLEAR
MODE
ALM
+
-
MENU
TLL
EBL2
VRM2
EBL1
VRM1
BRILL
TRAILS
OFF CENT
ZOOM
HL OFF
GAIN
SEA
RAIN
GAIN
SEA
RAIN
TX
SAVE
ENTER
CLEAR
TRAILS
ALM
MODE
OFF CENT
EBL1
VRM1
BRILL
MENU
TLL
HL OFF
EBL2
VRM2
ZOOM
AUTO
ACQ
ACQ
TLL
MARINE RADAR
MR-1210
e
r
q
w
t
u
o
!1
y
i
!2
!9
!8
!7
!6
!5
!4
!3
e
r
q
w
t
u
o
!1
y
i
!2
!9
!8
!7
!6
!5
!4
!3
!0
!0
Control panel (English)
Control panel (Chinese)
■
Front panel
Содержание MR-1210RII
Страница 70: ......
Страница 78: ...MEMO ...
Страница 79: ...MEMO ...
Страница 80: ...1 1 32 Kamiminami Hirano ku Osaka 547 0003 Japan A7155H 1EX 2 Printed in Japan 2014 2017 Icom Inc ...
