Icom MR-1210RII Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 80

background image

OPEN SOURCE LICENSE

I

With regards to the software components utilized in the MR-1210

The software utilized in the MR-1210 consists of two or more independent software components; one part is copy-
righted by Icom Inc., and the other is of a third party, or parties.

Regarding the open source code based on GPL, LGPL and/or any other licenses

The software components licensed based on the GNU General Public License (GPL) or the GNU Lesser General

Public License (LGPL) and/or any other licenses for which the third party provided is included in the MR-1210.

Those certain software components, and their source code if any, are distributed on an “as is” basis and follow

the GPL or LGPL and/or any other licenses guidelines regarding modification and reproduction by the purchaser
of the MR-1210.

Certain source code may be obtained by accessing the following URL address.

URL: http://www.icom.co.jp/world/support/download/gpl/

  To receive the source code, please send your inquire to the Icom Support Center.
  There will be a nominal charge for shipping and handling.
    Icom Support Center
    1-6-19 Kamikuratsukuri, Hirano-ku, Osaka 547-0004, Japan

The user acknowledges and agrees that Icom Inc. shall not be responsible for any support, details, or explanation
of the source code.

The MR-1210 equipment purchased is covered under Icom Inc.’s standard product guarantee.

However, as to the software components or any source code covered under any GPL or LGPL and/or any other
licenses, the end user acknowledges and agrees that there is no guarantee by Icom Inc., the copyright holder, or
any third party or parties.

With regards to the use of the source code
The copyright belongs to the copyright holder described in the source code, even though this software distributes
the copyright free of charge as an open source software.

Icom Inc. and any third party or parties shall not bare responsibility or be held liable for non-operation, warranty li-
ability, including the operating performance of this software, or guarantee or be held liable for any other matters.
In addition, Icom Inc. and the third party shall not be held liable for any guarantee regarding the salability of this
software or the adaptability for any specific purpose of the purchaser/user.

«
...
69
70
71
72
73
...
»

Содержание MR-1210RII

















































































Отзывы:

Нет отзывов

Похожие инструкции для MR-1210RII

Бренд: Garmin Страницы: 20

Pro Trident XXL bottle

Бренд: Marport Страницы: 36

Бренд: Navman Страницы: 18

Бренд: SimonsVoss Страницы: 16

Бренд: Garmin Страницы: 76

MicroSound V16.00

Бренд: Shenzhen Waytronic Electronics Страницы: 5

Бренд: Uniden Страницы: 36

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 4

Бренд: Garmin Страницы: 14

Бренд: Garmin Страницы: 12

Бренд: Garmin Страницы: 10

Бренд: Garmin Страницы: 75

Бренд: nanoradar Страницы: 20

Бренд: CSL Страницы: 32

Бренд: Hertz Страницы: 32

Бренд: K40 ELECTRONICS Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды