![background image](http://html.mh-extra.com/html/icom/ic-910h/ic-910h_instruction-manual_611497038.webp)
36
5
RECEIVE AND TRANSMIT
n
SSB mode operation
q
Push [M/S•BAND] to select the desired frequency
band.
w
Push [SSB/CW] to select USB or LSB mode.
• Push [SSB/CW] for 1 sec. to switch between USB and
LSB when either the USB or LSB has been selected.
e
Rotate the tuning dial to set the desired frequency.
r
Push [PTT] to transmit and speak into the micro-
phone at a normal voice level.
t
Rotate [MIC GAIN] so that the MAIN band indicator
periodically lights red brightly.
• The brightness increases when the ALC is activated.
y
Release [PTT] to receive.
Tuning dial
[SSB/CW]
[M/S•BAND]
[TRANSMIT]
[MIC GAIN]
n
Speech compressor
The speech compressor increases average RF out-
put power, improving signal strength and readability in
SSB. The IC-910H has a built-in, low-distortion speech
compressor circuit.
➥
Push [COMP] to turn the speech compressor ON
and OFF.
• Either USB or LSB should be selected.
• “COMP” indicator appears when the speech compres
-
sor is activated.
[MIC GAIN]
[COMP]
MAIN band LED
lights in red while transmitting.
D
Compression level setting
q
Select USB or LSB mode.
w
Preset the transceiver as follows:
[COMP] function
: OFF
[RF POWER] control : Max. counterclockwise
e
Transmit at your normal voice level.
r
Adjust the [MIC GAIN] control so that the MAIN
band indicator periodically lights red brightly wheth-
er or not you speak softly or loudly.
t
Push [COMP] to turn the speech compressor ON.
y
Push [SET] then [COMP] to enter the COMP set
mode.
u
Rotate the tuning dial to adjust the compression
level to the point where the maximum value and the
MAIN band indicator brightness does not increase,
whether or not you speak softly or loudly.
• When the MAIN band indicator continuously lights red
with increased brightness, your transmitted voice may
be distorted.
• It’s a good idea to adjust the compressor level by mon
-
itoring with an other transceiver or receiver, if you have
one, or with an other station.
i
Push [COMP] to exit the COMP set mode.
ALC indicator
While transmitting, the MAIN/SUB band indicator
shows the ALC condition. Brightness increases more
than usual when the ALC function is activated.
VOX function
The VOX (Voice-operated Transmission) function is
available for switching between transmit and receive
with your voice. See p. 33 for details.
Содержание IC-910H
Страница 1: ...INSTRUCTION MANUAL VHF UHF ALL MODE TRANSCEIVER i910H ...
Страница 86: ...84 MEMO ...
Страница 87: ...85 MEMO ...