![background image](http://html.mh-extra.com/html/icom/ic-910h/ic-910h_instruction-manual_611497040.webp)
38
5
RECEIVE AND TRANSMIT
n
Connections for CW
Before operating in CW, select the paddle type using
the SSB/CW set mode.
q
Push [SSB/CW] to select CW mode.
• “CW” indicator appears.
w
Push [SET] then [SSB/CW] to enter the SSB/CW
set mode.
e
Push [DN
Z
] or [
Y
UP] to select the paddle type
item.
• “PAddLE” is displayed.
r
Rotate the tuning dial to select the paddle type.
• Push [M-CL 5] for 1 sec. to return to the default setting.
t
Push [SSB/CW] to exit the SSB/CW set mode.
n
CW mode operation
q
Connect a paddle or straight key as above.
w
Push [M/S•BAND] to select the desired frequency
band.
e
Push [SSB/CW] to select CW mode.
• Push [SSB/CW] for 1 sec. to select CW narrow mode
after the CW mode selection when the optional CW nar-
row filter, FL-132 (for MAIN band) or FL-133 (for SUB
band), is installed.
r
Rotate the tuning dial to set the operating frequen-
cy.
t
Push [TRANSMIT] to set the transceiver to transmit
mode.
• The MAIN band indicator lights red.
y
Operate the paddle or key to transmit the CW sig-
nal.
u
Push [TRANSMIT] to return to receive mode.
Tuning dial
[SSB/CW]
[M/S•BAND]
[TRANSMIT]
CW
Paddle
Straight key
Microphone
[KEY] jack
[MIC] connector
CW paddle with normal polarity (default)
CW paddle with reverse polarity
CW paddle use as bug-key
Electronic keyer OFF (straight key)
Substitute paddle function
(microphone [UP]/[DN])
NOTE: A stereo plug must be used even when a
straight key is used. See page 12 or 15.
NOTE: [UP]/[DN] keying does not function while
pushing [PTT] on the microphone. Push [TRANS-
MIT] on the front panel or use the semi break-in
function in this case.
Содержание IC-910H
Страница 1: ...INSTRUCTION MANUAL VHF UHF ALL MODE TRANSCEIVER i910H ...
Страница 86: ...84 MEMO ...
Страница 87: ...85 MEMO ...