![background image](http://html.mh-extra.com/html/icom/ic-910h/ic-910h_instruction-manual_611497047.webp)
7
45
SCANS
n
Scan types
Scanning searches for signals automatically and
makes it easier to locate new stations for contact or lis-
tening purposes. The IC-910H has several scan types;
programmed scan, memory scan and mode select
scan.
The scanning operation can be performed indepen-
dently for MAIN and SUB band. And to search a sub-
audible tone frequency for a repeater frequency, a tone
scan is also available.
n
Preparation
• Squelch condition
Set the [RF/SQL] control as for regular operation.
• When receiving a signal
• Scan pauses for 10 sec. when receiving a signal,
then resumes.
• When a signal disappears while scan is paused, scan
resumes approx. 3 sec. later.
• Scan resume ON/OFF
You can select the scan to resume or cancel when re-
ceiving a signal, in the scan set mode. Scan resume
ON/OFF must be set before operating a scan. See de-
tails described at right for ON/OFF setting.
• Scan start/stop operation
Push [SCAN .] to start and cancel scanning.
• Scan speed
Scan speed can be selected from 2 levels, high (de-
fault) or low, in the scan set mode. See details de-
scribed at right.
• Setting scan resume condition
q
Push [SET] then [SCAN .] to enter the scan set
mode.
w
Push [DN
Z
] or [
Y
UP] to select the scan resume
item.
• “SC-rES” is displayed.
e
Rotate the tuning dial to select scan resume condi-
tion from ON and OFF.
• “ON”: scan resumes, “oFF”: scan cancels
• Push [M-CL-5] for 1 sec. to return to the default setting.
r
Push [SCAN .] to exit from the scan set mode.
• Setting scan speed
q
Push [SET] then [SCAN .] to enter the scan set
mode.
w
Push [DN
Z
] or [
Y
UP] to select the scan speed
item.
• “SC-SPd” is displayed.
e
Rotate the tuning dial to select scan resume condi-
tion from HI and Lo.
• Push [M-CL-5] for 1 sec. to return to the default setting.
r
Push [SCAN .] to exit from the scan set mode.
MEMORY SCAN
Repeatedly scans all programmed memory channels.
This scan operates in memory mode.
M-CH 1
M-CH 5
M-CH 2
M-CH 3
M-CH 4
M-CH 6
M-CH 7
M-CH 99
Call channels and scan edge channels are not scanned.
Blank
PROGRAMMED SCAN
Repeatedly scans between two scan edge frequencies
(scan edge memory channels 1A/2A/3A and 1b/2b/3b).
This scan operates in VFO mode.
Scan starts from the displayed frequency or the lower
scan edge frequency.
Scan
Scan edge
(1A/2A/3A)
Scan edge
(1b/2b/3b)
Jump
MODE SELECT SCAN
Repeatedly scans all selected mode memory channels.
This scan operates in memory mode.
FM
FM
USB
FM
CW
USB
FM
FM
Содержание IC-910H
Страница 1: ...INSTRUCTION MANUAL VHF UHF ALL MODE TRANSCEIVER i910H ...
Страница 86: ...84 MEMO ...
Страница 87: ...85 MEMO ...