![background image](http://html.mh-extra.com/html/icom/ic-910h/ic-910h_instruction-manual_611497035.webp)
33
5
RECEIVE AND TRANSMIT
n
FM mode operation
q
Push [M/S•BAND] to select the desired band.
w
Push [FM] to select FM mode.
• “FM” indicator appears.
• Push [FM] again to select repeater operation after FM
mode selection. “DUP–” and “T” indicators appear.
• Push [FM] for 1 sec. to select FM narrow mode after FM
mode selection. “FMN” indicator appears.
e
Rotate the tuning dial to set the desired frequency.
r
Push [PTT] to transmit.
• The MAIN band indicator lights red.
t
Speak into the microphone at a normal voice level.
• Setting the [MIC GAIN] control to 10–12 o’clock is rec
-
ommended.
y
Release [PTT] to receive.
Tuning dial
[FM]
[M/S•BAND]
[TRANSMIT]
[MIC GAIN]
n
VOX operation
(for SSB and FM)
The VOX (Voice-operated Transmission) function
switches between transmit and receive with your voice.
This function provides an opportunity to input log en-
tries into your computer, etc., while operating.
q
Push [M/S•BAND] to select the desired band.
w
Push either [SSB/CW] or [FM] to select phone
mode (USB, LSB or FM).
e
Push [VOX] to switch the VOX function ON and
OFF.
• “VOX” indicator appears while the VOX function is acti
-
vated.
D
Adjusting the VOX gain
q
Push [SET] then [VOX] to enter the VOX set mode.
w
Push [DN
Z
] or [
Y
UP] to select the VOX gain item.
•“GAIn” is displayed.
e
Rotate the tuning dial to adjust the VOX gain while
speaking into the microphone at a normal voice
level, until the transceiver begins transmitting.
• With too sensitive a setting, the transceiver may trans
-
mit with other than your voice, such as noise, receiving
signal, etc.
• Push [M-CL 5] for 1 sec. to return to the default value.
r
Push [VOX] to exit VOX set mode.
D
Adjusting the anti-VOX gain
q
Push [SET] then [VOX] to enter the VOX set mode.
w
Push [DN
Z
] or [
Y
UP] to select anti-VOX gain
item.
• “Anti” is displayed.
e
Rotate the tuning dial to adjust the anti-VOX gain
while receiving a signal with a suitable audio output
level, to the point where the transceiver does not
transmit with the audio output from the speaker.
• Push [M-CL 5] for 1 sec. to return to the default value.
r
Push [VOX] to exit VOX set mode.
D
Adjusting the VOX delay
q
Push [SET] then [VOX] to enter the VOX set mode.
w
Push [DN
Z
] or [
Y
UP] to select the VOX delay
item.
• “dELAy” is displayed.
e
Rotate the tuning dial to adjust the VOX delay time
while speaking into the microphone at a normal
speed, to a convenient interval before returning to
receive.
• Push [M-CL 5] for 1 sec. to return to the default value.
r
Push [VOX] to exit VOX set mode.
Содержание IC-910H
Страница 1: ...INSTRUCTION MANUAL VHF UHF ALL MODE TRANSCEIVER i910H ...
Страница 86: ...84 MEMO ...
Страница 87: ...85 MEMO ...