![background image](http://html.mh-extra.com/html/icom/ic-910h/ic-910h_instruction-manual_611497042.webp)
6
40
MEMORY OPERATION
n
Memory channels
The IC-910H has 106 memory channels (99 for regu-
lar, 6 scan edges and 1 call) and they are equipped for
each frequency band for storing the most often used
frequencies and operating mode, as well as tone fre-
quency, offset frequency, etc.
n
Operation on a memory
channel
Frequency and mode, etc., can be changed in a mem-
ory channel. However, they will be cleared if [MW 4] is
not pushed.
D
Memory channel selection
q
Push [V/M 1] to select memory channel mode.
• “MEMO” indicator appears.
w
Push [DN
Z
] or [
Y
UP] to select the desired mem-
ory channel.
• Memory channel changes continuously while holding
[DN
Z
] or [
Y
UP].
• The tuning dial rotation while pushing [F-INP ENT] also
selects memory channel.
e
Push [V/M 1] to return to VFO mode.
D
During VFO mode operation
By pushing [DN
Z
] or [
Y
UP] during VFO mode op-
eration, memory channel is also selectable. However,
the frequency readout does not change in this case,
only the memory channel number changes.
[
Y
UP]
[DN
Z
]
FM
VFO A
MEMO
FM
MEMO
USB
Select memory mode
Select memory
channel
Memory
Channel
1–99
1A/1b–3A/3b
C
Description
Regular memory channels. Programs
operating frequency, mode, subaudible
tone activity with frequency and split/du-
plex conditions.
Scan edge channels. Programs edge fre-
quencies for programmed scan.
Call channel recalls a specified frequen-
cy on the instant. Programs operating
frequency, mode, etc., and is available
for each band, independently.
Содержание IC-910H
Страница 1: ...INSTRUCTION MANUAL VHF UHF ALL MODE TRANSCEIVER i910H ...
Страница 86: ...84 MEMO ...
Страница 87: ...85 MEMO ...